Danger: Fall Hazard, Keep Guardrail in Place When Dock Is Vacant and Dock Door Is Open Sign - OSHA

J. J. Keller signs, markings and labels are available in a variety of materials to suit your specific needs! See below for a listing of all available materials. To see materials available for a specific sign, select the Material dropdown menu at the top of this page.

Alumaboard | Rigid Substrate

• Designed for heavy-duty outdoor industrial-strength rigid signage applications, impact resistant and withstands harsh environments
• Recommended for larger signs (14"x10" or bigger) and permanent applications
• .118" thick rigid aluminum composite material that's 1/2 the weight of traditional solid aluminum
• Surface printed with UV inks and "anti-graffiti" UV top coating
• 15/64" (6.0mm) mount hole in each corner (excluding cone-topper signs, which have no drill holes)
• Rounded corners

Aluminum | Rigid Substrate

• Designed for medium-duty indoor/outdoor industrial-strength rigid signage applications, impact resistant and withstands harsh environments
• .0320" thick rigid white aluminum
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 10-year substrate outdoor durability†
• -40˚F to +450˚F service temperature range
• 3/16" (5.0mm) mount hole in each corner
• Rounded corners

Aluminum, Heavy-Duty | Rigid Substrate

• Designed for heavy-duty indoor/outdoor industrial-strength rigid signage applications, impact resistant and withstands harsh environments
• Recommended for larger signs (14"x10" or bigger)
• .0800" thick rigid white aluminum
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 10-year substrate outdoor durability†
• -40˚F to +450˚F service temperature range
• 3/16" (5.0mm) mount hole in each corner
• Rounded corners

Aluminum, High-Intensity Prismatic (HIP) Reflective | Rigid Substrate

• Designed for permanent traffic and work zone outdoor signage applications, impact resistant and withstands harsh environments
• Ideally suited for traffic control areas
• Provides uniform daytime and nighttime visual appearance
• High-intensity micorprismatic film is 5 times more reflective than engineer-grade film (0.5˚ observation angle)
• .0150" thick reflective film applied to .0800" thick rigid white aluminum
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Aluminum contains 75% post-consumer recycled material
• Up to 10-year substrate outdoor durability†
• -10˚F to +150˚F service temperature range
• 3/16" (5.0mm) mount hole in top and bottom center (configured for post-mount or fence-mount applications)
• Rounded corners
• Meets ASTM D4956 Type III & IV, AASHTO M268

Plastic | Rigid Substrate

• Designed for light-duty indoor rigid signage applications, impact resistant and withstands harsh environments
• .0200" thick rigid white high-impact polystyrene (HIPS)
• Surface printed with UV inks and "anti-graffiti" UV top coating
• 3/16" (5.0mm) mount hole in each corner
• Rounded corners

Plastic, Laminated | Rigid Substrate

• Designed for medium-duty indoor rigid signage applications, impact resistant and withstands harsh environments
• Lamination offers added protection from UV fading, washing, chemical splash, and abrasion
• .0200" thick rigid white high-impact polystyrene (HIPS)
• Surface printed with UV inks and protected by .0020" UV polyester over-laminate
• 3/16" (5.0mm) mount hole in each corner
• Rounded corners

Plastic, Laminated Dry Erase | Flexible Substrate (Writeable Scoreboards)

• Designed for indoor applications with lamination providing a dry erase (write-on/wipe-off) surface‡
• .0200" thick rigid white high impact polystyrene (HIPS)
• Surface printed with UV inks and protected by .0020" dry erase polyester over-laminate
• Not recommended for outdoor use
• 3/16" (5.0mm) mount hole in each corner
• Rounded corners

Tagboard | Flexible Substrate

• Designed for temporary indoor applications
• .0165" thick white polycoated tagboard
• Surface printed with UV inks and "anti-graffiti" UV top coating
• No drill holes
• Rounded corners

Vinyl, Permanent Adhesive | Flexible Substrate

• Designed for light-duty indoor/outdoor applications requiring adhesion to difficult substrates
• .0034" thick flexible white vinyl with high-tack permanent acrylic pressure-sensitive adhesive and peel-off liner
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 5-year substrate outdoor durability†
• -40˚F to +200˚F service temperature range
• +40˚F minimum application temperature
• No drill holes
• Rounded corners

Vinyl, Removable Adhesive | Flexible Substrate

• Designed for temporary indoor/outdoor applications
• .0034" thick flexible white vinyl with removable acrylic pressure sensitive adhesive and peel-off liner
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 6 months clean removability (adhesion increases over time and may not remove cleanly after 6 months)
• Up to 5-year substrate outdoor durability†
• -40˚F to +200˚F service temperature range
• +40˚F minimum application temperature
• No drill holes
• Rounded corners

Vinyl, Clear, Permanent Adhesive | Flexible Substrate

• Designed for light-duty indoor/outdoor applications requiring a transparent sign background
• .0024" thick flexible clear vinyl with permanent acrylic pressure sensitive adhesive and peel-off liner
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 7-year substrate outdoor durability†
• -40˚F to +200˚F service temperature range
• +40˚F minimum application temperature
• No drill holes
• Rounded corners

Vinyl, Glow-In-The-Dark, Permanent Adhesive | Flexible Substrate

• Designed for indoor applications to exceed requirements for life safety, emergency egress, and other photoluminous safety standards
• Withstands heavy pedestrian traffic (not intended to withstand industrial truck traffic)
• .0070" thick flexible photoluminescent vinyl with high-tack permanent acrylic pressure sensitive adhesive and peel-off liner
• Surface printed with UV inks and "anti-graffiti" UV top coating
• Up to 5-year substrate indoor durability†
• -20˚F to +150˚F service temperature range
• +40˚F minimum application temperature
• No drill holes
• Rounded corners
• Meets DIN 67510, ASTM 2072, ISO 15370, IMO RES A.752(18), PSPA Class B

Vinyl, Laminated, Permanent Adhesive | Flexible Substrate

• Designed for medium-duty indoor/outdoor applications requiring adhesion to difficult substrates
• Lamination offers added protection from UV fading, washing, chemical splash, and abrasion
• .0034" thick flexible white vinyl with high-tack permanent acrylic pressure-sensitive adhesive with peel-off liner
• Surface printed with UV inks and protected by .0020" UV polyester over-laminate
• Very good resistance to discoloration caused by UV light
• Up to 5-year substrate outdoor durability†
• -40˚F to +200˚F service temperature range
• +40˚F minimum application temperature
• No drill holes
• Rounded corners

Vinyl, Magnetic | Flexible Substrate

• Designed for temporary signage display on metal surfaces
• .0300" thick flexible white vinyl bonded to magnetic backing
• High-intensity, multi-pole magnetic arrangement designed to produce superior holding power on most metallic surfaces (will not adhere to aluminum)
• Surface printed with UV inks and "anti-graffiti" UV top coating
• -15˚F to +160˚F service temperature range
• No drill holes
• Rounded corners

† Substrate durability is based upon manufacturer specifications and is not an implied warranty. Performance and durability of sign substrates will depend upon a number of factors including (but not limited to) substrate selection and preparation, compliance with recommended application procedures, sign placement, geographic area, exposure conditions, atmospheric conditions (e.g. fog, snow, rain), surface deposits (e.g. dirt, dew, frost), maintenance and age.

‡ Manufacturer suggested dry erase brand chisel point marking pens to use for best results: Avery Marks-A-Lot®, Expo® Scents, Expo® Bold Color, and Expo® Regular®.