- Flip-file placard meets DOT placarding specifications of 49 CFR § 172.519 for hazardous materials identification
- Available in the most popular combinations and built with fewer features & lower cost materials compared to our standard flip placards
- J. J. Keller® Dura-Clip® fasteners stop clip arms from being dislodged
- Back plate manufactured of .016" galvanized steel (30% post-consumer recycled content)
- Stainless steel reinforced quick-release clamps hold panels securely in place
- Clipped corners on top and bottom to accommodate roll-up door applications
- Placard legends screen printed with fade-resistant UV inks
- Legends manufactured of .024" aluminum (75% post-consumer recycled content)
- Complies with ISO 9000 Green Initiative, California Buy Recycled program and EPA Comprehensive Procurement Guidelines (CPG) program
Back Plate Measurements:
- Side to side – 13.75" (350mm)
- Left to right (corners) – 18.56" (472mm)
- Top to bottom (corners) – 14.96" (380mm)
Flip Placard Legends:
- Division 2.1 Flammable Gas
- Blank
- Division 2.2 Oxygen
- Division 2.3 Inhalation Hazard
- Division 2.2 Non-Flammable Gas
Need to Purchase a Case?: 12 per case
Size: 13.75" x 13.75"
Placard Split Type: No Split
Placard Corner Type: 2 Clipped Corners
Industry: Transportation
Hazard Class: 2
Material: Galvanized Steel, Aluminum
Legend: Non-Flammable Gas - Division 2.2, Flammable Gas - Division 2.1, Oxygen - Division 2.2, Inhalation Hazard - Division 2.3