Aluminum Flip Placard - 18 Legend, Worded, Unpainted Back Plate

• Flip placard meets DOT placarding specifications of 49 CFR § 172.519 for hazardous materials identification
• Heavy .032" aluminum back plate (white or unpainted) for wind protection
• Fade-resistant acrylic paint
• Stainless steel spring clips to hold panels securely in place
• Aluminum contains 75% post-consumer recycled content
• Complies with ISO 9000 Green Initiative, California Buy Recycled program and EPA Comprehensive Procurement Guidelines (CPG) program

Standard Flip Placard Back Plate Measurements:

• No Clipped Corners (Full Frame):
  • Edge to edge (sides) – 13.75"
  • Left to right (corners) – 18.6"
  • Top to bottom (corners) – 18.6"

• 2 Clipped Corners:
  • Edge to edge (sides) – 13.75"
  • Left to right (corners) – 18.6"
  • Top to bottom (corners) – 14.8"

• 4 Clipped Corners:
  • Edge to edge (sides) – 13.75"
  • Left to right (corners) – 14.8"
  • Top to bottom (corners) – 14.8"

• Split, No Clipped Corners:
  • Left to right (corner-to-corner width) – 18.6"
  • Top to bottom (corner-to-split height) – 9.3"

Flip Placard Legends:

• Dangerous
• Class 3 Flammable Liquid
• Class 8 Corrosive
• Division 2.1 Flammable Gas
• Division 5.2 Organic Peroxide
• Division 4.1 Flammable Solid
• Division 2.3 Inhalation Hazard
• Division 6.1 Inhalation Hazard
• Blank
• Division 2.2 Non-Flammable Gas
• Class 9 Miscellaneous
• Division 6.1 Poison
• Division 5.1 Oxidizer
• Division 4.3 Dangerous When Wet
• Division 4.2 Spontaneously Combustible
• Division 6.1 PG III
• Division 1.4 Explosives
• Division 1.5 Explosives
• Class 7 Radioactive