- Flip placard meets DOT placarding specifications of 49 CFR § 172.519 for hazardous materials identification
- J. J. Keller® Dura-Clip® fasteners stop clip arms from being dislodged
- Back plate manufactured of .032" thick aluminum
- Legends manufactured of .024" aluminum (increased thickness from .020" to .024" for added strength)
- Four stainless steel reinforced quick-release clamps hold panels securely in place
- Full ink bleeds (color runs all the way to the edge of legend panels)
- Aluminum contains 75% post-consumer recycled content
- Complies with ISO 9000 Green Initiative, California Buy Recycled program and EPA Comprehensive Procurement Guidelines (CPG) program
- Rectangular panel design
- Rectangular-shaped placard legend panels:
- lessen risk of injury from bent and dog-eared pages
- provide greater strength/rigidity all the way to corners
- improve stability due to hinges being closer to panel corners
- reduce noise and vibration which leads to long-term performance
- improve placard appearance due to less hinges being used
- Rectangular-shaped placard legend panels:
Back Plate Measurements:Rectangle Panel Placards:
- Side to side - 14.25" x 14.25" (363mm x 363mm)
- Left to right (corner to corner) - 16" (408mm)
- Top to bottom (corner to corner) - 15.5" (394mm)
Flip Placard Legends:
- Class 3 Flammable Liquid
- Class 8 Corrosive
- Division 5.1 Oxidizer
- Dangerous
- Division 1.4 Explosives
- Blank
- Division 4.3 Dangerous When Wet
- Division 2.2 Non-Flammable Gas
- Class 7 Radioactive
- Division 6.1 Toxic
- Division 2.1 Flammable Gas
Size: 14.25" x 14.25"
Placard Corner Type: 4 Clipped Corners
Need to Purchase a Case?: 12 per case
Industry: Transportation
Material: Aluminum
Legend: Flammable Liquid - Class 3, Dangerous When Wet - Division 4.3, Non-Flammable Gas - Division 2.2, Radioactive - Class 7, Toxic - Division 6.1, Flammable Gas - Division 2.1, Corrosive - Class 8, Oxidizer - Division 5.1, Dangerous, Explosives - Division 1.4