Division 2.3 Inhalation Hazard Placard - Blank

Overview

• Meets DOT placarding and marking specifications
• J. J. Keller placards are available in the following materials: tagboard (with or without adhesive), vinyl (with permanent or temporary adhesive), polystyrene (rigid plastic, laminated or non-laminated), aluminum. Click the Select Option dropdown menu above to see available stock materials for this placard.
• Measures 10-3/4" x 10-3/4"
• Imprinting available. Call toll-free for pricing.

Placard Materials

J. J. Keller placards are available in a variety of materials to suit your specific needs! See below for a listing of all available materials. To see materials available for a specific placard, select the Material Type dropdown menu at the top of this page.

Vinyl, Removable Adhesive

• Made with .0034" thick flexible vinyl film
• -40°F to +200°F service temperature range
• +40°F minimum application temperature
• Up to 5-year substrate outdoor durability†
• Designed for temporary applications, with removable acrylic pressure sensitive adhesive backing and 90# peel-off liner. Clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to UV and temperature). Adhesive will have a tendency to become permanent beyond 6 months.
• Priced as low as 81¢ each

Vinyl, Economy, Removable Adhesive

• Designed for short-term applications
• .0032" thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50# peel-off liner
• Clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to UV and temperature). Adhesive will have a tendency to become permanent beyond 6 months.
• Up to 1-year substrate outdoor durability†
• -40°F to +200°F service temperature range
• +40°F minimum application temperature
• Priced as low as 50¢ each

Vinyl, Permanent Adhesive

• Made with .0034" thick flexible vinyl film
• -40°F to +200°F service temperature range
• +40°F minimum application temperature
• Up to 5-year substrate outdoor durability†
• Designed for permanent applications, with high-tack permanent acrylic pressure sensitive adhesive backing and 90# peel-off liner
• Priced as low as $2.16 each

Tagboard, Non-Adhesive

• .0160" thick (176 lb.) polycoated tagboard
• Designed for single-trip/temporary applications
• Meets/exceeds minimum requirements for tagboard placards as defined in 49 CFR part 172.519
• Priced as low as 50¢ each

Tagboard, Removable Adhesive

• .0160" thick (176 lb.) polycoated tagboard
• Designed for single-trip/temporary applications
• Meets/exceeds minimum requirements for tagboard placards as defined in 49 CFR part 172.519
• Includes removable acrylic pressure sensitive adhesive backing and 40# peel-off liner, with +15°F to +150°F service temperature range and +35°F minimum application temperature
• Priced as low as 73¢ each

Polystyrene, Unlaminated

• .0200" thick rigid white high impact polystyrene (HIPS) is impact resistant and able to withstand harsh environments
• Designed for temporary applications
• Priced as low as $1.61 each

Polystyrene, Laminated

• .0200" thick rigid white high impact polystyrene (HIPS) is impact resistant and able to withstand harsh environments
• Designed for temporary applications
• .0020" UV polyester over-laminate offers added protection from UV fading, washing, chemical splash, and abrasion
• Priced as low as $3.25 each

Aluminum

• Designed for permanent applications
• .0240" thick rigid aluminum (75% post-consumer recycled content) is impact resistant and withstands harsh environments
• Features rounded corners for safe handling
• Includes six .24" (6.0 mm) pre-drilled mount holes
• Up to 10-year substrate outdoor durability†
• -40°F to +450°F service temperature range
• Priced as low as $3.07 each

† Substrate durability is based on manufacturer specifications and is not an implied warranty. Performance and durability of placard substrates will depend on a number of factors including (but not limited to) substrate selection and preparation, compliance with recommended application procedures, placard placement, geographic area, exposure conditions, atmospheric conditions (e.g. fog, snow, rain), surface deposits (e.g. dirt, dew, frost), maintenance and age.