MCS-150 Update Service

The full name of the MCS-150 form is “Motor Carrier Identification Report.” It is a form to register with the Federal Motor Carrier Safety Administration (FMCSA) as a regulated entity.

An MCS-150 form must be submitted before the carrier begins operations and every 24 months or biennially.

The FMCSA’s preference is that the form be submitted electronically. J. J. Keller's experts can handle your MCS-150 form quickly and easily! Call 888.473.4638. The form may also be scanned or completed electronically and submitted as a webform. A tracking number will be provided. The form can be faxed to 202-366-3477.

If a carrier has no electronic means available, the MCS-150 can be mailed to:

Federal Motor Carrier Safety Administration
Office of Registration and Safety Information
Room W65-206
Attn: Registration and Licensing Team
1200 New Jersey Avenue SE
Washington, DC 20590

The definition in §390.5 refers to a vehicle used on a highway, in interstate commerce, that meets any one of the following criteria:

• Has a gross vehicle weight rating (GVWR) or gross combination weight rating (GCWR), or gross vehicle weight (GVW) or gross combination weight (GCW) of 10,001 pounds or more, whichever is greater;
• Is designed to transport more than 8 passengers (including the driver) for compensation;
• Is designed to transport more than 15 passengers (including the driver), and is not used to transport passengers for compensation; or
• Is transporting hazardous materials in quantities requiring the vehicle to be placarded.

There are two other MCS-150 forms, the MCS-150B and the MCS-150C, that are to be used only in certain circumstances. The MCS-150B is the combination Motor Carrier Identification Report and FMCSA Safety Permit Application. The MCS-150B is required instead of the MCS-150 only if an intrastate or interstate carrier is transporting the type and quantity of hazardous materials listed in 49 CFR §385.403 that requires a Hazardous Material Safety Permit (HMSP).

The MCS-150C Intermodal Equipment Provider Identification Report is required for intermodal equipment providers subject to the Federal Motor Carrier Safety Regulations (FMCSRs). An intermodal equipment provider supplies intermodal equipment, such as chassis and containers, to a carrier.

No, the FMCSA will not contact you via a third-party for payment of your MCS-150. Read more about companies posing as governement agencies.

You can update your USDOT number more frequently than every two years. In fact, it’s generally advised you update more frequently. Keeping your data current helps paint an accurate picture of your operation when being compared to other carriers under the Compliance Safety Accountability (CSA) program. Your vehicle miles traveled along with your vehicle count are used to determine your Crash and Unsafe Driving BASICS measures under the program. If your vehicle counts or mileage increase, you’ll want to submit an update to ensure a true representation of your “at bats.” If you’re fleet is decreasing in size, you’ll also want to update your MCS-150’s vehicle count since the number reflected is the starting point to determine your fee bracket for the Unified Carrier Registration (UCR).

The Hazardous Material Safety Permit (HMSP) program is reserved for haulers of very dangerous materials. The permit is issued after an MCS-150B, is filed with the FMCSA. Not all hazardous material haulers need a HMSP.

Section 385.403 outlines which carriers must obtain the permit:

• Radioactive Materials: A highway route-controlled quantity of Class 7 material;
• Explosives: More than 55 pounds of explosives (Division 1.1, 1.2 or 1.3), or an amount of a Division 1.5 – also an explosive – that requires placarding;
• Toxic by Inhalation Materials:
• More than one liter (1.08 quarts) per package of Hazard Zone A;
• Bulk packaging (i.e. capacity greater than 119 gallons) of Hazard Zone B;
• Containers with a capacity of 3,500 gallons of Hazard Zone C or of Hazard Zone D; or
• Compressed or refrigerated liquefied methane or liquefied natural gas, or other liquefied gas with a methane content of at least 85 percent, in bulk packaging of 3,500 gallons or more.

The “Toxic by Inhalation Materials” hazard zones represent the amount of gas that is considered a lethal concentration. There are four zones with hazard zone “A” being the most lethal and hazard zone “D,” the least.

There are no fees directly tied to the permit application process. If a carrier has a good safety rating, it is relativity easy to obtain the HMSP, however, it is much more difficult to give one up. The MCS-150B only has two options – applying for an initial permit and requesting a renewal.

The insurance or financial responsibility amounts that are required for a HMSP are either $1,000,000 or $5,000,000 depending on the quantity and material.