Available Materials
J. J. Keller signs, markings and labels are available in a variety of materials to suit your specific needs! See below for available materials for this custom sign.
Vinyl Permanent Adhesive | Flexible Substrate
- Designed for light-duty indoor/outdoor applications requiring adhesion to difficult substrates
- .0034” thick flexible white vinyl with high-tack permanent acrylic pressure-sensitive adhesive and peel-off liner
- Surface printed with UV inks and “anti-graffiti” UV top coating
- Up to 5-year substrate outdoor durability†
- -40˚F to +200˚F service temperature range
- +40˚F minimum application temperature
- Rounded corners
Reflective Vinyl Permanent Adhesive | Flexible Substrate
- Designed for non-critical traffic signs and pressure sensitive reflective labels
- .0068” thick flexible engineer-grade reflective vinyl with permanent pressure sensitive adhesive and peel-off liner
- Surface printed with UV inks and “anti-graffiti” UV top coating
- Up to 7-year substrate outdoor durability†
- +65˚F minimum application temperature
- Meets ASTM D4956 Type I
- Rounded corners
Laminated Vinyl Permanent Adhesive | Flexible Substrate
- Designed for medium-duty indoor/outdoor applications requiring adhesion to difficult substrates
- Lamination offers added protection from UV fading, washing, chemical splash, and abrasion
- .0034” thick flexible white vinyl with high-tack permanent acrylic pressure-sensitive adhesive with peel-off liner
- Surface printed with UV inks and protected by .0020” UV polyester over-laminate
- Very good resistance to discoloration caused by UV light
- Up to 5-year substrate outdoor durability†
- -40˚F to +200˚F service temperature range
- +40˚F minimum application temperature
- Rounded corners
Vinyl Removable Adhesive | Flexible Substrate
- Designed for temporary indoor/outdoor applications
- .0034” thick flexible white vinyl with removable acrylic pressure sensitive adhesive and peel-off liner
- Surface printed with UV inks and “anti-graffiti” UV top coating
- Up to 6 months clean removability (adhesion increases over time and may not remove cleanly after 6 months)
- Up to 5-year substrate outdoor durability†
- -40˚F to +200˚F service temperature range
- +40˚F minimum application temperature
- Rounded corners
Glow-In-The-Dark Vinyl Permanent Adhesive | Flexible Substrate
- Designed for indoor applications to exceed requirements for life safety, emergency egress, and other photoluminous safety standards
- Withstands heavy pedestrian traffic (not intended to withstand industrial truck traffic)
- .0070” thick flexible photoluminescent vinyl with high-tack permanent acrylic pressure sensitive adhesive and peel-off liner
- Surface printed with UV inks and “anti-graffiti” UV top coating
- Up to 5-year substrate indoor durability†
- -20˚F to +150˚F service temperature range
- +40˚F minimum application temperature
- Rounded corners
- Meets DIN 67510, ASTM 2072, ISO 15370, IMO RES A.752(18), PSPA Class B
† Substrate durability is based upon manufacturer specifications and is not an implied warranty. Performance and durability of sign substrates will depend upon a number of factors including (but not limited to) substrate selection and preparation, compliance with recommended application procedures, sign placement, geographic area, exposure conditions, atmospheric conditions (e.g. fog, snow, rain), surface deposits (e.g. dirt, dew, frost), maintenance and age.