Hazmat Placards

J. J. Keller can help you meet DOT placarding requirements with our wide selection of hazmat placards. Choose from hundreds of durable, high-quality hazardous material options, as well as holders and accessories. Shop with confidence knowing our experts monitor regulatory developments to help you stay compliant.

Available Materials

J. J. Keller placards are available in a wide variety of materials to suit your specific needs.

Vinyl Adhesive

  • Choose from permanent or removable adhesive
  • Made with .0034" thick flexible vinyl film
  • -40˚F to +200˚F service temperature range
  • +40˚F minimum application temperature
  • Up to 5-year substrate outdoor durability*
  • Permanent Adhesive: designed for permanent applications, with high-tack permanent acrylic pressure sensitive adhesive backing and 90# peel-off liner
  • Removable Adhesive Vinyl: clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to UV and temperature). Adhesive will have a tendency to become permanent beyond 6 months.
  •  
  •  
  •  
  •  

Economy Removable Adhesive Vinyl

  • Designed for short-term applications
  • Made with 3.2 mil (.0032" thick) flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50# peel-off liner
  • Clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to UV and temperature). Adhesive will have a tendency to become permanent beyond 6 months.
  • Up to 1-year substrate outdoor durability*
  • -40˚F to +200˚F service temperature range
  • +40˚F minimum application temperature
  •  
  •  
  •  

Polystyrene

  • Choose laminated or unlaminated
  • Made with 20 mil (.0200" thick) rigid white high impact polystyrene (HIPS)
  • Designed for temporary applications
  • Laminated Polystyrene: made with 20 mil (.0200" thick) rigid white high impact polystyrene (HIPS) with .0020" UV polyester over-laminate

Tagboard

  • Choose adhesive or non-adhesive
  • Non-Adhesive: made with 176 lb. (.0160" thick) polycoated tagboard
  • Designed for single-trip/temporary applications
  • Meets/exceeds minimum requirements as defined in 49 CFR part 172.519
  • Removable Adhesive Tagboard: made with 176 lb. (.0160" thick) polycoated tagboard with removable acrylic pressure sensitive adhesive backing and 40# peel-off liner
  •  
  •  
  •  

Aluminum

  • Designed for permanent applications
  • .0240" thick rigid aluminum (75% post-consumer recycled content) is impact resistant and withstands harsh environments
  • Features rounded corners for safe handling
  • Includes six .24" (6.0 mm) pre-drilled mount holes
  • Up to 10-year substrate outdoor durability*
  • -40˚F to +450˚F service temperature range
  •  
  •  
  •  
*Substrate durability is based on manufacturer specifications and is not an implied warranty. Performance and durability of placard substrates will depend on a number of factors including (but not limited to) substrate selection and preparation, compliance with recommended application procedures, placard placement, geographic area, exposure conditions, atmospheric conditions (e.g. fog, snow, rain), surface deposits (e.g. dirt, dew, frost), maintenance and age.

3 Big Reasons

Why J. J. Keller is Your Best Source for Placards

  • Unmatched Selection

    You won't find a broader selection anywhere else! In fact, we've doubled our flip-file offering.

  • New Lower-Priced Option

    With our new economy vinyl selection, you have a lower-priced option to choose from.

  • Backed by Experts

    Order with confidence knowing that our subject-matter experts are continuously monitoring regulations to ensure our selection meets applicable DOT requirements and color and design standards.